Welcome to RH Electronics

POSITIVE Polarity 1KV HV High Voltage PMT Power Supply 700V - 1000V for Photomultiplier Tube

Availability: In stock

Only 1 left

$85.00
OR

Quick Overview

POSITIVE Polarity 1KV High Voltage for PMT and Gamma Spectroscopy


Low ripple Adjustable Power Supply Unit Positive polarity 700v-1000v with Metal Enclosure. The power supply has excellent HV regulation and additional filtration for the clean DC output. Has reverse polarity protection with original supplied DC connector. The board has low quiescent current of 3mA non-loaded and 6mA with 100M load. Maximum output current on 1000V is 100uA, but it's recommended to use this power supply only with high impedance PMT divider of 100 Mega ohm.


You can trim HV output with miniature potentiometer inside the unit enclosure. Default preset is for 900V that usually fit many Photomultiplier tubes. Measure HV with 10M multimeter on the daburn wire output.


This power supply can be used for DIY Spectroscopy projects or driving Scintillation Probes. The module comes installed into metal enclosure for full shielding to protect your project from DC-DC step-up noise.


Technical Specifications:



  • Positive Polarity High Voltage stabilized output: 700V-1000V

  • Compatible with DIY Scintillation Probes

  • Battery DC voltage: 4.8V-5.5V

  • Battery current with 100M load at 1000V: 6mA

  • Battery quiescent current at 1000V: 3mA

  • Full start time: app. 15 seconds with 100M probe load

  • Recommended load of the PMT probe divider: 80-100 Mega ohm

  • Reverse polarity protection included

  • Excellent DC output filtartion

  • Metal Enclosure for full noise shielding

  • Comes with branded Daburn high voltage wire

  • HV Power Supply dimensions: 115x60x30 mm

  • Shipping Weight: 500gr

  • UPC Number: 635292807411

  • SKU: RH-K-PMT-2-PS

Gamma Spectrometry DIY HV Power Supply

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Gamma Spectrometry DIY HV Power Supply
  • Measuring High Voltage on the power supply board
  • Measuring High Voltage on the power supply board
  • Positive Polarity HV Power Supply 1KV
  • Positive Polarity HV Power Supply 1KV
  • Custom made 2.1 DC power connector with reverse polarity protection on input

Details


Positive Polarity High Voltage Power Supply Unit: the power supply is high quality HV DC step-up converter with stabilized adjustable Positive output 700v - 1000v. The board has low quiescent current of 3mA non-loaded and 6mA with 100M load. The HV output is low noise with additional filtration. You can set HV output with miniature potentiometer inside the unit enclosure. Default preset is for 900V that usually fit many Photomultiplier tubes.

During starting, when 1uF filter capacitors are still charging, the board can consume 60mA current until HV output is stabilized, it recommended to suspend PMT signal processing for the first 30 seconds.

High Voltage Power Supply for PMT 

HIGH VOLTAGE IS DANGEROUS!

The kit can be used by professional only. You are fully responsible for any technical damage or health injury caused by this electronic device.

The energy of 2x1uF fully charged capacitors is (2*1*10^-6F*1000V^2)/2 = 1 Joule and its absolutely not safe level for accident touching. Be careful!

 

I recommend you to use high impedance 80M-100M divider on your PMT Photomultiplier tube. You can refer my DIY Gamma Ray Spectrometer PMT Project as a reference example. 


Package include:

  • Assembled HV Unit power supply module with enclosure
  • Custom made 2.1 DC Connector



 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.